ETO COC

ETO COC

The ETO CoC (Electro-Technical Officer Certificate of Competency) is the statutory competency certificate that allows a qualified officer to serve in the certificated ETO capacity. It is not simply a course certificate: it confirms that the holder has completed the required education, approved training, sea service and competency assessment under India’s Merchant Shipping STCW framework and STCW Regulation III/6.

This guide follows the practical route: eligibility → approved training → sea service and TAR Book → documents → written/oral assessment → CoC → revalidation. Because portal steps and exam dates can change, always follow the latest DG Shipping notice.

Current regulatory position (checked 15 September 2026)
DG Shipping continues to publish the Merchant Shipping (STCW) Rules, 2014 as the operative framework, as amended. A replacement set of Merchant Shipping STCW Rules, 2026 has been published as a draft; the draft itself states that it will come into force only on publication in the Official Gazette. Therefore, this article does not treat the draft as binding law.

 

ETO CoC at a Glance

For a first-time applicant, these are the key points worth remembering before reading the detailed sections below.

Point

Current position

Who needs the CoC

An Electro-Technical Officer serving on a seagoing ship with main propulsion machinery of 750 kW or more.

Minimum certification age

18 years under STCW Regulation III/6.

Standard approved route

At least 12 months of combined workshop skills training and approved sea service.

Minimum sea service within that route

At least 8 months of approved seagoing service as part of an approved training programme.

Key training evidence

Approved ETO TAR Book / training record, completed and endorsed during qualifying service.

Assessment

Written examination plus oral competency assessment; practical competence is evidenced through approved training, onboard service and related assessment.

Revalidation

At intervals not exceeding five years, subject to the current DG Shipping revalidation requirements.

What Is an ETO Certificate of Competency?

ETO Certificate of Competency

An ETO CoC is a Government of India Certificate of Competency for the capacity of Electro-Technical Officer. Under Rule 48 of the 2014 STCW Rules, every ETO serving on a seagoing ship powered by main propulsion machinery of 750 kW or more must hold the prescribed certificate, issued as Form 27.

The certificate is not the same thing as a college course-completion certificate. The training institute prepares you and certifies course completion; DG Shipping/Mercantile Marine Department (MMD) assessment and examination lead to the statutory CoC.

In practical terms, the CoC confirms competence in three broad areas:

  • Electrical, electronic and control engineering at the operational level.
  • Maintenance and repair of shipboard electrical/electronic equipment.
  • Control of ship operations and care for persons on board, including the safety competencies required by STCW.

ETO CoC Eligibility Requirements

There are two layers to understand: the statutory CoC requirements under STCW, and the normal entry conditions for India’s approved pre-sea ETO training route. They are related, but they are not identical.

Core STCW / CoC requirements

  • Minimum age for certification: 18 years.
  • Approved education and training meeting the competence standard in STCW Code Section A-III/6.
  • Required workshop skills training and approved sea service, documented as required.
  • Required safety competence under the relevant sections of STCW Chapter VI.
  • Medical fitness and other certification conditions required by the Indian maritime administration.

Normal Indian pre-sea ETO course entry

DG Shipping’s seafarer advisory for the pre-sea ETO course lists the following academic route. Candidates should re-check the approved-institute/eligibility listing before admission because course approvals and institute lists can change.

  • 10+2 with Physics, Chemistry, Mathematics and English as separate subjects, with at least 50% in English in Class 10 or Class 12.
  • Either a three-year Diploma with 60% marks or a four-year Degree (including permitted lateral-entry cases) with 50% marks in an eligible electrical/electronics discipline.
  • Eligible disciplines include Electrical Engineering, Electronics Engineering, Electrical & Electronics Engineering, Electronics & Telecommunication/Communication Engineering, Electronics & Instrumentation, or an accepted equivalent.
  • The Diploma/Degree must be recognised by the relevant State/Central Government or AICTE, as applicable.
  • The published DGS advisory lists a maximum age of 35 years for normal entry to the pre-sea ETO course. This is different from the STCW minimum age of 18 for certification.

Quick eligibility summary

Requirement

Standard approved route

What to remember

CoC age

At least 18

Statutory certification minimum.

Pre-sea course age

Up to 35 in the DGS advisory

Course-entry condition; check latest DGS listing.

Education

Eligible Diploma/Degree in electrical/electronics streams

Marks and recognition requirements apply.

Sea service

At least 8 months at sea within the standard 12-month combined training route

Must be approved and properly documented.

Training record

Approved TAR/training record book

Do not leave onboard tasks unsigned or incomplete.

Assessment

Written + oral competency examination

Practical competence is also evidenced through approved training/TAR.

Table of Contents

Required Sea Service and Training Record

supervised onboard work

For the standard approved-training route under Rule 48 and STCW Regulation III/6, the candidate must complete at least 12 months of combined workshop skills training and approved sea-going service. Within that total, at least 8 months must be approved sea-going service as part of an approved training programme that meets Section A-III/6 and is documented in an approved training record book.

The rules also contain an alternative route of at least 36 months of combined workshop skills training and approved sea-going service, of which at least 30 months must be sea-going service in the engine department. This is not the normal fresh-candidate pathway used by most trainees who complete an approved Indian ETO programme.

Why the ETO TAR Book matters

The TAR Book is not paperwork to be completed at the end of a contract. It shows that trainees practised and assessed specified onboard tasks and competencies under supervision. DG Shipping separately issued Engineering Circular 145 of 2019 on the requirement of the ETO TAR Book for trainee ETOs.

  • Start the approved TAR Book before or at the beginning of the qualifying onboard training period, as required by your approved programme.
  • Get tasks signed by the authorised supervising officer at the time they are completed.
  • Keep CDC entries, sea-service testimonials and TAR dates consistent with one another.
  • Do not assume extra time at sea will automatically cure an incomplete or improperly documented TAR Book; eligibility is assessed from approved evidence.

Documents Required for the ETO CoC

DG Shipping moved ETO assessment and seat booking into its online system, and the exact upload fields can change. Treat the following as a practical preparation checklist, not as a substitute for the live portal checklist shown when you apply.

  • INDoS/seafarer profile details and the application generated through the current DG Shipping online system.
  • Passport and Indian Continuous Discharge Certificate (CDC), where applicable to the route and sea service being claimed.
  • 10th/12th marksheets and the eligible Diploma/Degree certificates and marksheets used for admission/eligibility.
  • DGS-approved ETO pre-sea course completion certificate and any other approved training certificates required for your pathway.
  • Sea-service testimonials and relevant CDC entries showing the qualifying service.
  • Completed and properly endorsed ETO TAR Book / approved training record book.
  • Valid medical fitness certificate from a DGS-approved medical practitioner, as required for certification.
  • Relevant STCW safety-course Certificates of Proficiency/records required by the administration.
  • Online payment/application records and any additional documents specifically requested during MMD eligibility assessment.

Do not use a static document list blindly
DG Shipping’s systems and upload requirements are being modernised. Before assessment or seat booking, log in to the current portal and compare your documents with the live checklist. A missing sea-service entry, mismatched date, unsigned TAR task or unreadable scan can delay eligibility even when the underlying service is genuine.

Before You Submit: 7 Quick Checks

  • Confirm that your name, date of birth and document numbers are consistent across your seafarer profile, passport, CDC and education/training records.
  • Compare every upload with the live DG Shipping portal checklist rather than relying on an old screenshot or coaching list.
  • Check that sea-service dates in the CDC, testimonials and TAR Book agree with one another.
  • Make sure required TAR tasks and endorsements are complete; do not leave signatures or dates to be reconstructed later.
  • Use clear, complete scans. Cropped pages, unreadable seals or missing reverse sides can create avoidable queries.
  • Check the validity of the medical certificate and required STCW safety records at the time you apply.
  • Save the submitted application, payment receipt and acknowledgement so you can trace the case if a clarification is raised.

Continue Learning with Merchant Navy Decoded

CoC preparation becomes easier when you keep improving the shipboard concepts behind the syllabus instead of treating the exam as a one-time memory test. Merchant Navy Decoded provides maritime learning and career resources, including ETO-focused guidance, that can help you connect electrical theory with actual shipboard equipment, company expectations and career decisions.

You can also access these resources through the Merchant Navy Decoded App, which brings maritime learning, career guidance, company insights, and useful seafarer resources together in one place. Download the app on Android or iOS to continue learning throughout your Merchant Navy journey. After downloading the app, you can also seek ETO COC guidance on the SAILOR DECODED app.

Written, Oral and Practical Assessments

The current DG Shipping examination framework for ETO candidates is built around a written examination and an oral competency assessment. Recent 2026 written-exam notices list the ETO paper as “Marine Electro Technology & SSEP” and schedule it for three hours. Monthly dates and centre arrangements can change, so the latest Engineering CoC notice should control your planning.

1. Written examination

  • Tests technical knowledge relevant to ETO competence, including marine electrical/electronic/control systems and safety/environmental protection content covered by the prescribed syllabus.
  • Use the latest DGS syllabus/model paper and current examination notice rather than relying only on coaching notes or old question banks.

2. Oral assessment

The oral assessment checks whether you can apply your knowledge safely in realistic shipboard situations. Expect the examiner to probe fault-finding logic, safe isolation, equipment operation, maintenance decisions, emergency response and the limits of your authority rather than merely asking for memorised definitions.

3. Where “practical” competence is assessed

A common mistake is to describe the ETO CoC as having a universal third, stand-alone “practical exam”. The current published DG Shipping ETO schedule identifies the formal written paper, while the overall STCW competence system accepts practical evidence from approved in-service experience, training-ship experience, simulator training and laboratory-equipment training, as appropriate. In India, the approved pre-sea practical training, supervised onboard service, TAR Book and competency/oral assessment together provide the practical-evidence trail.

So, prepare for practical questioning and demonstrations of competence, but do not assume there is always a separate nationally scheduled practical paper unless the latest DG Shipping notice specifically says so.

How to Prepare for the Written and Oral Assessments

Preparation is stronger when it combines the prescribed syllabus with actual shipboard reasoning. Use the latest DG Shipping syllabus and notices as the base, then practise explaining how you would diagnose and manage a fault safely.

Area

What to focus on

Useful preparation method

Written

Marine electro-technology, electrical/electronic/control systems and the safety/environmental content in the prescribed paper.

Revise by system, draw simple circuits/logic where useful, and practise under the current three-hour paper format shown in 2026 exam notices.

Oral

Safe fault-finding, isolation, equipment operation, maintenance choices, alarms/emergencies and the limits of your authority.

Answer in a sequence: make the situation safe, identify evidence, isolate/verify as required, diagnose logically, then explain restoration and checks.

Onboard evidence

Systems and tasks you actually handled during approved training and recorded in the TAR Book.

Revisit your own TAR tasks, equipment manuals, single-line diagrams, PMS records and lessons from real faults or maintenance jobs.

Exam-day principle: do not try to sound impressive. Give safe, technically defensible answers and say what you would verify before acting when information is incomplete. 

For smooth ETO COC preparation, you can go through the ETO COC Excellence package on the SAILOR DECODED app or on the website.

linking theory to diagrams

STCW Regulation III/6 Explained

STCW Regulation III/6 is the international rule that sets the minimum certification standard for Electro-Technical Officers. India implements that standard through its Merchant Shipping STCW rules and its national training/examination procedures.

What Regulation III/6 requires

  • An ETO on a seagoing ship with main propulsion machinery of 750 kW or more must hold a Certificate of Competency.
  • The candidate must be at least 18 years old.
  • The standard route requires at least 12 months combined workshop skills training and approved sea service, including at least 6 months of approved sea service within an approved training programme and documented in an approved training record book.
  • The candidate must complete approved education/training and meet the competence standard in Section A-III/6 of the STCW Code.
  • The candidate must also meet specified STCW Chapter VI safety and emergency competence standards.

What Section A-III/6 is trying to prove

Section A-III/6 goes beyond knowing electrical theory. The competence table covers the safe operation and monitoring of shipboard electrical, electronic and control systems, maintenance and repair, and duties connected with safe ship operation. The IMO table also recognises several ways of demonstrating competence, including approved sea experience and approved laboratory/simulator training where appropriate.

High-voltage training: an important correction
Older Indian circulars can make it appear that a separate High Voltage course is always mandatory for the ETO CoC examination or revalidation. DG Shipping Engineering Circular 141 of 2017 explicitly states that High Voltage Training is not mandatory for CoC examination/revalidation by Engineer Officers and ETOs. Ship-specific duties, company requirements and competence for particular equipment may still create separate operational training needs.

Common Mistakes That Delay ETO CoC Progress

  • Treating the pre-sea course-completion certificate as if it were the statutory CoC.
  • Counting sea time without checking whether it is approved, properly documented and linked to the required training route.
  • Completing TAR Book entries retrospectively or leaving tasks unsigned until the end of the contract.
  • Submitting records with inconsistent names, dates or sea-service periods across the CDC, testimonials, TAR Book and online profile.
  • Preparing from old question banks while ignoring the current DGS syllabus, exam notice or portal workflow.
  • Assuming a separate “practical paper” or a separate High Voltage course is universally mandatory without checking the current DG Shipping rule/circular that applies to your case.

CoC Issuance, Revalidation and Career Benefits

CoC issuance

After the candidate has satisfied the eligibility assessment and successfully completed the required examinations/assessments, the administration issues the ETO Certificate of Competency in the prescribed form. Keep your seafarer profile, contact details, and supporting records accurate to avoid preventable data mismatches that delay certificate processing.

Revalidation

ETO CoCs are subject to revalidation at intervals not exceeding five years. DGS Circular 07 of 2022 sets out a specific ETO revalidation procedure. It requires medical fitness, the specified safety Certificates of Proficiency, continued professional competence and the approved Refresher and Updating Training (RUT) course.

  • One normal way to show continued professional competence is at least 12 months of approved sea service performing functions appropriate to the CoC during the preceding five years.
  • An alternative is at least three months of approved sea service immediately in the preceding six months before revalidation.
  • The circular also provides specified alternatives, including qualifying full-time ETO-course teaching or passing an approved oral test, subject to the circular’s conditions.
  • Once requirements are met, the CoC is revalidated for the applicable five-year period under the DGS procedure.

Career benefits of holding a valid ETO CoC

  • Legal eligibility to serve in the certificated ETO capacity on ships to which Regulation III/6 applies, subject to the vessel’s safe-manning and company requirements.
  • A recognised competency standard that employers can verify rather than relying only on a training certificate or work experience.
  • A stronger base for company-specific progression to roles such as Senior ETO/Chief Electrical Officer where such positions exist. These titles are company/vessel structures, not a universal higher STCW ETO CoC grade.
  • Better long-term portability into technical shore roles such as electrical superintendent support, service engineering, marine automation, technical training or ship-management functions, depending on experience and additional qualifications.

Important: a valid CoC establishes statutory competency; it does not guarantee a particular employer, salary, vessel type or promotion timeline. Those depend on company requirements, experience, performance and vacancies.

How SMVD Marine Academy Can Support Your ETO Journey

The CoC itself can only be obtained through the approved statutory process, but preparation starts much earlier. SMVD Marine Academy can support ETO aspirants with structured technical preparation, sponsorship-exam practice, mock interviews, tests, communication practice and mentoring. That support is most useful when it runs alongside—not instead of—official DG Shipping eligibility, approved training and onboard competence requirements.

If you are still at the sponsorship/pre-sea stage, review SMVDM’s ETO preparation and academy resources, check the ETO selection results for context, and use the online application page when you are ready to seek structured guidance.

Continue Learning with Merchant Navy Decoded

CoC preparation becomes easier when you keep improving the shipboard concepts behind the syllabus instead of treating the exam as a one-time memory test. Merchant Navy Decoded provides maritime learning and career resources, including ETO-focused guidance, that can help you connect electrical theory with actual shipboard equipment, company expectations and career decisions.

You can also access these resources through the Merchant Navy Decoded App, which brings maritime learning, career guidance, company insights, and useful seafarer resources together in one place. Download the app on Android or iOS to continue learning throughout your Merchant Navy journey. After downloading the app, you can also seek ETO COC guidance on the SAILOR DECODED app.

Conclusion

The ETO CoC is not obtained by completing one course or simply accumulating sea time. The standard route combines eligible technical education, DGS-approved ETO training, properly documented onboard service, an approved TAR Book, medical/safety compliance and successful competency assessment. The most important numbers to remember are the STCW minimum age of 18 and, for the standard approved-training route, at least 12 months of combined workshop training and approved sea service with at least 6 months at sea.

Before paying a fee, booking an exam or joining a course, check the latest DG Shipping eligibility, examination and portal notices. The rules are stable at the STCW level, but application workflows, examination dates and document-upload requirements can change.

FAQs

A candidate must meet the applicable DG Shipping/STCW age, approved education and training, sea-service, TAR/record-book, medical and safety-competence requirements before being assessed for the ETO CoC examination. For the normal Indian pre-sea route, the DGS advisory lists eligible electrical/electronics Diploma/Degree qualifications with specified marks and a maximum pre-sea course entry age of 35 years.

Under the standard approved-training route, STCW Regulation III/6 and India’s Rule 48 require at least 12 months of combined workshop skills training and approved sea-going service, including at least 6 months of sea-going service within an approved programme and documented in an approved training record book. A separate 36-month alternative route also exists in the rule.

Typically, prepare your seafarer/INDoS profile details, passport, CDC where applicable, education certificates, ETO pre-sea course certificate, sea-service evidence, completed ETO TAR Book, medical certificate, required STCW safety records and online application/payment documents. The live DG Shipping portal checklist is the final authority for what must be uploaded.

STCW Regulation III/6 is the international minimum certification standard for Electro-Technical Officers. It covers age, approved training, sea service, training-record documentation, competence under Section A-III/6 and specified safety competence requirements.

Not in the certificated ETO capacity covered by Regulation III/6. An Electro-Technical Officer serving on a seagoing ship with main propulsion machinery of 750 kW or more is required to hold the appropriate CoC. A person may only perform functions under any specific alternative permitted by the administration; that is not the same as holding or serving under a valid ETO CoC.

Editorial note: Fees, batch dates, course approvals and company eligibility rules can change. Re-check the linked official pages before publication updates or before a student pays any fee.

DG Shipping Engineering Circular 141 of 2017 states that High Voltage Training is not mandatory for CoC examination or revalidation for Engineer Officers and ETOs. However, a company, vessel or specific high-voltage duty may still require additional operational training or familiarisation.

ETO CoCs are revalidated at intervals not exceeding five years. The applicant must meet the current DG Shipping requirements for medical fitness, safety proficiency, continued professional competence and the applicable Refresher and Updating Training requirements.